| EDUCATION |
FROM |
TO |
| Universities Attended: |
|
|
| California State University at San Jose |
9/66 |
6/69 |
| California State University at San Diego |
2/70 |
1/72 |
| University of Central Florida |
5/72 |
12/74 |
| Degrees: |
|
|
| Master of Science, Mechanical Engineering |
1974 |
|
| Bachelor of Science, Aeronautical Operations |
1969 |
|
| |
|
|
| EMPLOYMENT HISTORY |
Aircraft Designs, Inc.
Monterey, California |
7/86 |
Present |
Kaiser Electronics Corporation
San Jose, California
Principal Engineer: Group leader of stress group.
Perform finite element and thermal analysis of
electro-optical cockpit display systems. |
9/84 |
7/86 |
FMC Corporation
San Jose, California
Sr. Project Engineer: Proposed, won a $1.4
million contract for, and designed the world's
first composite/ceramic armored personnel
carrier. Vehicle was built and has been
successfully tested by the Marines. |
2/82 |
9/84 |
Westinghouse Electric Corporation
Sunnyvale, California
Senior Engineer: Made major contributions towards
winning Vertical Launch Cruise Missile and MX
Missile Launcher contracts. Proposed, designed,
and optimized all graphite composite MX launch
canister. Six units were successfully built and
used. Coordinated design review meetings. Awarded
four patents. |
1/80 |
2/82 |
Ford Aerospace and Communications Corporation
Palo Alto, California
Program Engineer: Conceived, designed, and
analyzed structure for large satellite upper
stage booster. Submitted five patent applications
and helped prepare proposals. |
11/78 |
1/80 |
Lockheed Missiles and Space
Co., Inc.
Sunnyvale, California
Senior Design Engineer: Responsible for design
and development of advanced remotely piloted
vehicle airframe. Prepared reports and
coordinated RPV development effort. Wrote
performance and control programs for small
helicopter. Designed and analyzed composite rotor
blades. |
4/74 |
11/78 |
Martin Marietta Corporation
Orlando, Florida
Senior Engineer: Conceived, selected Inconel 718,
and made layouts for complete center section of
the Advanced Air Launched Cruise Missile. Section
was built and successfully tested. Submitted four
patent applications. Analyzed fiberglass laminate
for Sprint 1 and SAM-D canister covers. |
4/72 |
4/74 |
Convair Aerospace, a
Division of General Dynamics Inc.
San Diego, California
Design Engineer: Performed trade studies for the
use of advanced composite materials in wing to
fuselage attachments. Designed a graphite/epoxy
wing spar for the F-15. Designed, analyzed, and
made master layouts for D-1 Centaur tank and
Viking payload truss adapter. |
6/69 |
4/72 |
| |
|
|
| SPORTS |
Flying, surfing, sailing, hiking, kissing whales. Surf is up at Waimea Bay, HI.
Martin Hollmann at Waimea in 1961. |
The early years
building radio controlled models at age 11 in Oxnard, CA. Favorite models
include Live Wire Jr. (shown below), Bootstraps, and P-51 Mustang. |
 |
 |
|
